( 1) Just how to make the mold and mildew life longer?
With the continual introduction of wood pelletizer maker into the marketplace, the advancement of mechanical tools is likewise constantly transforming. The deterioration of the mold and mildew throughout the manufacturing of wood pellets is additionally a significant expense. So, how to keep it straight impacts the life span of the timber pellet making device. Therefore, it additionally straight impacts the handling expense of timber pellets. Exactly how to make the mold and mildew life of the timber pelletizer equipment equipment longer? Obtain your solution today!
Related post: wood pelletizer machine
① Consistently clean oil and fill
If the wood pelletizer equipment is not used for a month, it is suggested to cleanse the oil inside, so the oil will gradually set throughout long-term storage space, which will certainly make it difficult to get rid of the following time it is used, which will seriously influence the succeeding use the mold and mildew of wood pelletizer maker.
After the pellets are processed, it is necessary to use oil to grind for a period of time to make sure that all the oil stays in the die opening, which is of wonderful benefit to the job the following day and also is additionally for the lasting use the die. The oil can be mixed with waste engine oil as well as timber chips. It can be made once and also can be reused.
Related post: wood pellet plants
② No demand to clean up the mold and mildew for a long period of time
If the mold and mildew as well as pinch rollers are no longer used for a long time, it is advised to remove the mold after cleansing and storage space. The master cleans the sawdust pellets inside the mould and adheres to the mould surface area. In this way, on the one hand, we can avoid the venture from being tough to eliminate the pellets as a result of the solidifying of the pellets as a result of the lasting storage of the pupils. On the other hand, since the sawdust has water absorption, if the sawdust on the surface is not removed, it might increase the growth of the rust of the mold surface area.
③ The mold must be saved in a completely dry and ventilated place
A lot of the mold and mildews of the wood pelletizer equipment are made from alloy steel. If they remain in a humid area for a long period of time, the surface area of the mold and mildew might be harmed because of air rust, hence considerably reducing its service life.
④ The taking care of process should beware
The mold of the timber pelletizer maker is a high-precision component, and also the mold and mildew hole is thoroughly processed according to the compression proportion of the mold and mildew. If you are careless throughout the managing process, the framework of the internal wall surface of the mold and mildew hole is damaged, which might bring about molding throughout processing. reduced price as well as short life span.
Related post: Germany 2-2.5T/H Wood Pellet Plant
The above are the suggestions on exactly how to make the mold and mildew life much longer for timber pelletizer device Adhere to these 5 techniques to maintain the mold, and also I think your mold will certainly last much longer.
( 2) Why do the pellets generated by the wood pellets device have a bad appearance?
Why do the pellets created by the wood pellet mill machine look poor? Today we will certainly figure out why. Throughout the production of timber pellet fuel by the timber pellet production machine, there will be a situation where the pellets consist of powder and also have a rough surface. Right now, it is likewise required to check the devices information settings of the wood pelletizer machine. Besides, what is the factor for this phenomenon?
Wood pellets cause even more timber pellet powders, this feedstock can be caused by reduced dampness material, the dampness web content of wood pellet machine feed is typically in between 12% and also ~ 15%. After adjusting the dampness material of the raw material, the trouble still exists, that is, the pressure roller die is seriously used. When the internal surface area of the ring die of the timber pelletizer device is seriously used or the bit diameter requires to be transformed, it requires to be replaced. The surface of the sawdust pellets is rough, which might be brought on by the excessive wetness material of the raw product, or the initial use the mold and mildew. This problem can be addressed by changing the moisture content of the raw material, or by continuously grinding the mold and mildew with the product.
Related post: pelletizer machine
To summarize, the reasons the pellets produced by the wood pelletizing maker are not good in look are stated today. I wish it will certainly help you when you utilize the wood pellet device again. For many years, Richi Machinery has actually concentrated on the r & d and also production of timber pelletizer maker makers, biomass pellet devices, sawdust pellet machines, fuel pellet machines, timber processing devices, drying out equipment, cooling down devices as well as packaging equipment.
( 3) Advised timber pellet maker.
There are many timber pellet mill maker on the marketplace. Today, Richi Machinery will advise a few of them:
① The initial type of small wood pelletizer maker
It is a brand-new kind of biomass power equipment independently developed by our company's technical personnel and has independent copyright civil liberties. The timber pelletizer maker is basic in framework, easy to operate, stable in operation, and can work continually. The pressed pellets have the advantages of high thickness, high combustion worth, reduced dampness as well as reduced ash web content. The timber pellet maker maker transmission adopts high-precision gear transmission, 4 collections of gears are attached, and the hydraulic oil delivery system can automatically distribute oil in between the transmission and the major shaft bearing. The service life of the main shaft and transmission equipments.
The working parts of the timber pelletizer equipment die plate, pressure roller) are constructed from alloy steel, as well as the hardness after heat treatment can reach greater than 50, which makes certain the continuous procedure of the device and also extends the life span of the whole wood pelletizer machine The electronic control system of the major engine embraces the international conventional configuration of star-delta beginning, and also the operation is very steady.
② The second kind of little wood pelletizer machine.
Mostly suitable for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds and also various other plant stalks and also factory wastes. It is suitable for reduced temperature granulation of biological bacterial fertilizer, natural plant food as well as compound fertilizer.
Features of this timber pelletizer machine:
① The pressure rollers are evenly distributed, as well as the procedure is steady. At the same time, journalism area is increased, and also the manufacturing efficiency is enhanced.
② The screw center stress regulating framework is taken on, and also the timber pelletizer machine mold and mildew gap can be large or small, which appropriates for different products to ensure the pressing impact.
③ This version is furnished with Φ6-Φ10mm diameter mold and mildews, which are suitable for granulation of different products and attain the very best benefit.
For more: Richi Machinery
Comments