Today, aquatic floating feed device technology is very popular in the production of aquafeeds, as it can be made use of to create a range of feeds, whether floating or sinking, depending upon the needs of each species. Furthermore, the extruded feed made by aquatic floating feed equipment has much less adulteration as well as high effectiveness, aiding to boost digestibility.
Related post: Floating Fish Feed Mill
During the aquatic floating feed maker extrusion process, mechanisms such as temperature, humidity, stress will increase starch gelatinization, decompose and also soften the cell wall and release some quickly absorbable materials, hence promoting the digestion and also absorption of farmed animals.
Via marine floating feed device extrusion modern technology, it is possible to inhibit certain protease preventions (such as antitrypsin), destroy pathogens in raw materials or adjustment healthy protein properties to additional improve the contact with enzymes in fish and shrimp, helping to absorb food more quickly.
Extruded feed made by water drifting feed maker can regulate the material of substances and aid better detoxification. At the same time, the longer stablizing time in the water (12-36 hours) aids farmers to observe as well as control the feeding timetable.
Although extruded feed made by drifting fish feed making equipment has obvious benefits over pelleted feed, the preliminary investment expense of extruded feed production is higher, causing higher feed costs.
However, for high-end fish farming, an increasing number of individuals are paying attention to the market prospect of premium fish feed.
1. Highlight of water floating feed device.
Feeding, rotating cutting, as well as main drive all adopt regularity conversion speed law system, which has solid power, stable procedure, power saving, high water production performance, resilient equipment, low failure rate, and hassle-free procedure and maintenance.
The screw of drifting feed device is constructed from alloy material by special procedure, the life span is 3-4 times longer than that of residential similar equipments, as well as the cost of generating feed is reduced; the segmented mixed screw appropriates for a variety of raw materials as well as even more varied products.
Automatic lubrication system of the floating feed maker reduces mechanical energy intake and prolongs life span.
Related post:Shrimp Feed Mill
The feeding system embraces spiral forced feeding, and also the feeding is uniform and also vast. It can be furnished with an automated feeding system. The feeder is a screw conveying variable frequency speed control to readjust the feeding total up to control the puffing outcome ( measurable feeding, as well as can properly prevent the material from arching).
Linear bearing device adjustment system, adjust the tool accurately and promptly.
The twin-screw of floating feed machine has self-cleaning function, and also the use of tools is a lot more sensible and also hassle-free.
Update the arrangement of numerous tools technology and equipment to make the outcome of the twin-screw floating feed device bigger.
Different screws as well as length-diameter proportions can meet various manufacturing processes.
Visual automated temperature level control system to make temperature level control extra instinctive and specifications more accurate.
The total floating feed machine configuration The operation of the fish feed pellet extruder is more intuitive and also the maintenance is more convenient.
Dry blowing procedure takes on self-heating approach without vapor system, which is more in line with the real needs of individuals.
No adhesive is required to process the drifting feed, as well as it can preserve security in water for greater than 12 hours.
Small and average devices is particularly ideal for clinical study institutions, unique breeding ranches or medium as well as little feed factories. There are likewise specifically tailored experimental twin-screw floating feed equipments available for clinical research study units.
Related post:Fish Feed Production Plant
2. The distinction in between pellet feed and also squeezed out feed.
With the growth of the drifting fish feed processing sector, 2 widely utilized innovations presently utilized to generate aquafeed are pelleting as well as extrusion by drifting feed device. Contrasted to all-natural baits, such feeds have greater nutritional content as well as security, less wetness, much easier storage space, fewer microorganisms, and much longer storage space times.
Pelletizing by floating feed machine is a technique of compressing tiny pellets of raw material into bigger pellets, during which moisture, temperature level and also pressure can greatly influence the quality of the feed.
One of the primary benefits of pelleted feed is lower manufacturing costs. However, it has some drawbacks.
Among the greatest drawbacks of pelleted feed is that it sinks faster as well as liquifies swiftly in water (according to statistics, about 10-15% of feed is squandered), which means higher feed costs, reduced farming earnings, and much easier reason water air pollution.
Related post:floating feed extruder machine
3. Choose pellet feed or extruded feed?
Farmers, pick pellet feed or extruded feed?
When choosing feed, farmers must take into consideration the features of different marine varieties as well as feeding routines. Because the behavior of shrimps and also crabs is to locate food at the bottom, and then eat the food gradually, so the food should not be as well tough and not quickly soluble in water.
Consequently, extruded sediment by drifting feed equipment is the very best option since it is soft and also challenging to dissolve in water, as well as it is convenient for shrimp and also crab to consume, reducing feed waste and reducing water contamination.
Particularly in extensive shrimp farming, extruded feed must be leading, since it is easier for shrimp to absorb healthy protein from extruded feed, which lessens feed waste and also promotes much better protein absorption.
At the same time, we can additionally increase the absorption rate of the feed by adding useful microbes or promoting gastrointestinal products to the feed.
However, from a lasting viewpoint, using extruded feed, which is made by floating feed maker will raise the cost, and if the fish usage squeezed out feed in the mature period, it may lead to fish fat, large stomach, inadequate stress capability, not appropriate for long-distance transport, etc, resulting in a low cost at the time of sale.
Consequently, in the process of aquaculture, when many farmers make use of feed, they frequently utilize a mix of pellet feed and also extruded feed, which not only regulates water quality, decreases feed residues, yet also enhances productivity as well as economic benefits.
At the same time, the aquaculture sector is advertising the further growth of both feeds due to their corresponding benefits.
Related post:3-4T/H Floating Fish Feed Production Line
4. Installation of drifting feed machine.
( 1) Setup of floating feed machine pipeline rack.
The option of the installation placement of the pipeline shelf depends upon the site place, yet it ought to not be too far from the main engine. Much from the primary engine will trigger waste of products during pipe link on the one hand, and cause the hysteresis of the control system on the other hand.
If the installment location on site permits, the most effective placement of the pipeline rack is to be straight behind the main engine and also conditioner, alongside the main engine, and concerning 1 meter away from the main engine (there is a certain upkeep space), while ensuring that the pipeline shelf is readjusted upwards. The placement of the vapor line user interface of the conditioner is on the side of the conditioner.
In order to facilitate the cleansing of the ground as well as the outflow of waste water in the future, the pipe rack must be elevated by around 10 centimeters during installation. In the installation of each valve in the pipe, the position of the shutoff wheel should fulfill the needs of convenient operation for drifting feed machine.
( 2) Setup of drifting feed maker control box.
In order to promote the operation, the installation placement of the on-site control box should be picked near the bypass, and also a particular area needs to be scheduled between the bypass and the control box to temporarily place the wastes flowing from the bypass.
The range in between the frequency converter of the reducing motor and also the rotating positioner of the on-site cutter should not be as well far. It is regulated by voltage. If the range is too much, it will create voltage fluctuations and influence the cutting impact.
The circulating temperature display tool on the on-site control box is to show the temperature of each end of the puffing cavity in real time, and also the shown temperature series has certain demands. Area 2 Growth cavity ... till the product discharge development dental caries, this sequence requires to be taken note of when electrical wiring the electric control.
Furthermore, there are 4 nozzles on the water inlet pipeline of the dual-shaft differential conditioner of drifting feed machine. They manage the opening of each nozzle via the electro-magnetic cut-off valve.
The floating feed device conditioner inlet nozzle changes 1 to 4 on the control box correspond to the conditioners The first nozzle to the 4th nozzle from the feed end.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@richipelletmachine.com
コメント